OpenFlo

A Python pipeline + Tk GUI for high-content flow cytometry analysis. Reads FCS files, applies FlowJo-compatible compensation and gates, clusters populations (PhenoGraph / Leiden / FlowSOM), projects with UMAP and other embeddings, and exports per-sample / per-condition statistics, plots, and a FlowJo .wsp that round-trips back to the desktop tool. A themed (light/dark) editor with resizable, pop-out panels drives it all interactively.

Panel-agnostic — point it at any FCS set and pass --channels. The examples throughout use a generic 3-colour panel (BV421=CD11b, APC=CD34, PE-Cy7=CD45); substitute your own markers and controls.

📣 Free to use — the one ask is a citation

OpenFlo is free (MIT). If it contributes to research you publish or present, please acknowledge it: cite OpenFlo — Skyler Niedzielski (ORCID 0009-0004-4727-4639). Details in Citing; GitHub's "Cite this repository" button generates the entry for you.

---

Features

• FCS I/O via FlowIO; auto-detect channels, scatter, time
• Compensation matrix — read from .wsp, .fcs spillover, or CSV/TSV; manual editor; single-stain auto-optimizer
• Gating — interactive editor with rectangle, polygon, ellipsoid, quadrant, threshold/FMO, lasso and boolean (AND/OR/NOT) gates, nested population trees, and undo/redo; FlowJo Gating-ML v2 reader/writer for .wsp round-trip
• Auto-gate — reviewable, scored proposals (singlet ratio-band, BIC-selected GMM ellipses, 1-D valley/Otsu threshold) added as ordinary gates you accept, tweak, or delete
• Transforms — logicle, hyperlog, arcsinh, log (per-channel editor)
• Clustering — PhenoGraph (Louvain, optional cuGraph GPU), Leiden, and FlowSOM (SOM + metaclustering)
• Dimensionality reduction — UMAP (seeded/reproducible), t-SNE, PHATE, TriMap, PaCMAP (optional backends via pip install openflo[embed])
• Differential analysis — abundance/expression between sample groups (Mann-Whitney + log2 FC + BH-FDR)
• Spectral unmixing — reference-spectra least-squares for full-spectrum cytometers
• Quality control — time-based signal-drift detection plus flow-rate anomalies (clogs/bubbles) and margin/saturation event removal
• Cell cycle — DNA-content G1/S/G2M modelling (PI/DAPI/FxCycle/7-AAD/ Hoechst/DRAQ5…), in the pipeline and the editor (phases as populations)
• Voltage titration — Stain Index voltage walk over a titration series (openflo-voltage), with a recommended plateau voltage
• Outputs — per-sample heatmaps, scatter, FSC/SSC, UMAP, concatenated condition comparison plots, FlowJo Table-style CSV, and a saved .wsp
• Tk GUI with drag-and-drop, per-sample gate trees, compensation editor, and an interactive post-analysis viewer
• compare_workspace.py — diff OpenFlo vs FlowJo population counts cell by cell, HTML + CSV report

---

Install

Python 3.11+ required.

One-step setup (recommended). Clone, then run the bundled setup script — it creates a local .venv and installs OpenFlo plus every dependency:

git clone https://github.com/ChironTheCentaur/openflo.git
cd openflo
# Windows:        double-click setup.bat   (or run it in a terminal)
# Linux / macOS:  ./setup.sh               (chmod +x setup.sh once)

Then launch with openflo-gui.bat / ./openflo-gui.sh (these also run setup automatically the first time if the .venv is missing).

Manual install, if you prefer to manage the environment yourself:

python -m venv .venv
# Windows
.venv\Scripts\activate
# macOS / Linux
source .venv/bin/activate

pip install -e ".[gui]"        # OpenFlo + all deps (incl. drag-and-drop)

Either path installs the openflo-run, openflo-compare, openflo-gui, and openflo-voltage console scripts on your PATH.

Optional GPU acceleration (RAPIDS — conda only, not on PyPI):

conda install -c rapidsai -c conda-forge rapids=24.10

The pipeline auto-detects GPU at import time and falls back to CPU.

---

Quickstart

GUI

openflo-gui

Or use the quick-launch scripts at the repo root (they pick up the project .venv automatically, and work from a fresh checkout without pip install):

• Windows — double-click openflo-gui.bat (or run it in a terminal)
• Linux / macOS — ./openflo-gui.sh (chmod +x openflo-gui.sh once)

Add FCS files (or drag them in), pick X / Y channels — the plot updates live as you gate. Batch clustering / embedding over groups of samples runs from the Pipeline Workspace (its Run button).

CLI

openflo-run \
  --trials /path/to/fcs/ \
  --out outputs/ \
  --seed 42 \
  --export-wsp outputs/analysis.wsp \
  -v                                # -v for INFO, -vv for DEBUG, -q for warnings only

Compare OpenFlo vs FlowJo

openflo-compare my_flowjo.wsp --html compare_report.html

Programmatic

import openflo

s = openflo.FlowSample("sample.fcs")
s.run_qc()
s.auto_compensate()
s.apply_transform()
s.cluster(k=30)
s.export_stats("sample_stats.csv")

---

Common workflows

Single-sample exploration in the GUI

Load one FCS, gate interactively, save the gate set as a reusable template:

openflo-gui

1. Add FCS → pick your sample. It auto-compensates from $SPILL and logicle-transforms on load.
2. Pick X / Y channels from the combos; use Mode → pseudocolor for a density view.
3. Pick a Tool: Quadrant for a click-to-drop four-way split, Polygon for a freehand region, Edit to tweak vertices on an existing gate (see the hint line under the tool selector for gestures).
4. Save Template… writes a .json you can load later or hand to the CLI via --gates.

Multi-trial batch run with FMO gating

Process every FCS under trials/ against a single FMO control set, producing per-sample stats CSVs, per-condition comparison plots, and a FlowJo-compatible workspace:

openflo-run \
  --trials trials/day1,trials/day2 \
  --groups '[{"name":"Day1","samples":["m1","m2"],"fmo_set":"standard"},
             {"name":"Day2","samples":["m1","m2"],"fmo_set":"standard"}]' \
  --fmo-sets '{"standard":{"BV421-A":"bv421-fmo","APC-A":"apc-fmo","PE-Cy7-A":"pecy7-fmo"}}' \
  --k 30 \
  --workers 4 \
  --seed 42 \
  --export-wsp outputs/analysis.wsp \
  --out outputs/ \
  -v

The result: outputs/Day1/, outputs/Day2/, each with cluster heatmaps + UMAP + per-sample stats; plus a single analysis.wsp you can open in FlowJo to validate the gates.

Compare OpenFlo's gating against FlowJo

openflo-compare reads a FlowJo workspace, re-applies every Population gate via OpenFlo's evaluator, and emits a side-by-side diff of event counts per population per sample:

openflo-compare my_flowjo.wsp \
  --fcs-dir test_fcs/ \
  --html compare_report.html \
  --csv compare_report.csv

The HTML report colour-codes |Δ| > 5% rows for review. Use it to validate a new OpenFlo version against an established FlowJo analysis before switching the analysis pipeline over.

---

Synthetic data & self-test

OpenFlo ships a seeded synthetic dataset generator and a self-test so you can try features and confirm a change hasn't altered other behavior — without needing your own data:

openflo-synth --out synthetic_data   # write the full example dataset (PBMC,
                                      # FMO, comp, calibration, size beads, …)
openflo-selftest                      # run seeded data through the feature
                                      # paths and check against the baseline

openflo-selftest regenerates the seeded data, runs auto-clean, clustering, calibration and compensation, and compares each metric to a committed golden baseline (src/openflo/_golden.json):

✓ Auto-clean debris removed (bead 4 µm)            7.05%   (exp 7.05% ±0.25)
✓ Auto-clean dead cells removed (viability)       7.965%   (exp 7.97% ±0.6)
✓ Leiden clusters (PBMC, res 0.5)                     18    (exp 18 ±2)
✓ MESF calibration slope                          1.9978   (exp 2 ±0.05)
...
7/7 passed — behavior matches baseline.

A red row tells you exactly which feature drifted. After an intended change, refresh the baseline with openflo-selftest --update. The same golden file backs the pytest continuity tests, so the CLI and CI agree on one source of truth. (The generated .fcs files are regenerable and stay out of git — only the seeded generator is shipped.)

---

Repo layout

src/openflo/
  __init__.py        public API surface (lazy re-exports)
  pipeline.py        core: FCS, compensation, gating, clustering, UMAP, WSP IO
  cli.py             CLI runner (entry point: openflo-run)
  gui.py             Tk GUI (entry point: openflo-gui)
  compare.py         OpenFlo vs FlowJo diff tool (entry point: openflo-compare)
  voltage.py         Voltage titration / Stain Index (entry point: openflo-voltage)
  synthetic.py       seeded example-dataset generator (entry point: openflo-synth)
  selftest.py        golden behavior self-test (entry point: openflo-selftest)
  _golden.json       locked baseline metrics (selftest + continuity tests)
  preview.py         ad-hoc gate-preview utility
  inspect_fcs.py     FCS header dump
  template_library/  shipped gating-template library (cleanup recipes + example panel)
tests/               pytest suite (runs on synthetic data in CI)
templates/           dev test fixture (testtemplate.json)
scripts/             dev utilities (manual smoke test, helper scripts)
docs/                algorithms reference + notes

---

Algorithms

Curious what OpenFlo actually does to your data — defaults, parameter choices, citations? See docs/algorithms.md. Covers logicle defaults, FMO threshold derivation, Phenograph k choice, the spillover optimizer's heuristics, and what the pipeline is not good at.

---

Known limitations

• UMAP / t-SNE / TriMap / PaCMAP / PHATE have a slow first run each session (numba/JIT compilation, cached afterwards) — expected, not a hang.
• With downsampling set to Off, very large samples draw every event and can be slow; use a Display downsample (the default) or a Max-points cap.

Please file bugs on the GitHub issue tracker.

Roadmap

• More automatic comparative tooling — cross-group / cross-condition comparison with less manual setup.
• A library of generic gating templates covering common panels and use cases (today ships a single example template).
• Broad ease-of-use improvements across the gate editor and pipeline workspace.

Contributions welcome — see CONTRIBUTING.md.

---

Citing

OpenFlo is free under the MIT license — the only thing asked in return is a citation. If it contributes to research you publish or present, please cite it (citing the software you use is standard academic practice). Use the CITATION.cff shown in GitHub's "Cite this repository" sidebar (Niedzielski, S., OpenFlo, with ORCID).

Please also cite the upstream methods OpenFlo builds on, where you use them:

• Levine et al. 2015 — PhenoGraph
• McInnes et al. 2018 — UMAP
• Parks et al. 2006 — logicle transform
• FlowJo, LLC — .wsp format

---

Acknowledgements

OpenFlo was developed with substantial assistance from Anthropic's Claude (Claude Code), which contributed to implementation, testing, and analysis as a development tool. Claude is gratefully acknowledged here as a contributor — not as an author of the software.

---

License

OpenFlo's own code is MIT — see LICENSE.txt.

Third-party licenses

OpenFlo depends on third-party packages under their own licenses; they are installed via pip and are not redistributed in this repository. Most are permissive (BSD / Apache-2.0 / MIT / PSF). Note that graph-based clustering pulls in copyleft libraries through PhenoGraph:

Dependency	License
igraph	GPL-2.0-or-later
leidenalg	GPL-3.0

Your use of OpenFlo together with these libraries is subject to their terms. In particular, if you redistribute a bundled build that includes them (e.g. a packaged executable), the GPL obligations apply to that distribution. OpenFlo itself does not import or vendor these libraries directly — they are runtime dependencies of PhenoGraph. See each package's own license for details.

---

Disclaimers

Research use only. OpenFlo is provided for research and educational use. It is not a medical device and is not intended for diagnostic, therapeutic, or other clinical decision-making. Independently validate any result before relying on it. The software is provided "as is", without warranty of any kind (see LICENSE.txt).

Trademarks. "FlowJo" is a trademark of Becton, Dickinson and Company / FlowJo, LLC. OpenFlo is an independent, unaffiliated project and is not sponsored, endorsed by, or associated with them. The name is used only descriptively, to indicate interoperability with the FlowJo .wsp file format. All other trademarks are the property of their respective owners.