sht4x

Embedded SHT Drivers for Sensirion Temperature and Humidity Sensors - Download the Zip Package from the Release Page

SHT4X(SHT40, SHT41, SHT45) full-featured driver library for general-purpose MCU and Linux.

Arduino library for Sensirion SHT4x sensors

Embedded driver for the SHT4x sensor family.

RaspberryPi driver for Sensirion SHT4x sensors

ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors. Add a speaker and microphone and you have the kitchen sink too! Click the link below to configure a new device.

ESP32-P4 Ultra Low Power Processor Library for Arduino

Read temperature and humidity from Sensirion SHT4x sensors in Elixir.

a python class intended for reading Sensirion SHT4x device family through the i²c bus

ESPHome configuration for the ESPHome Indoor Multi-Sensor.

Sensirion SHT4x Driver for Embedded HAL

Configurable, reproducible preprocessing pipeline for SCD41 and LGR CO2 sensor data collected at SMEAR Estonia (smear.emu.ee). Transforms raw JSON message logs into quality-controlled 10-minute aggregates in CSV and Parquet formats.

Python I2C driver for Sensirion SHT4x Temperature and Humidity sensor

SHT4x driver for STs Nucleo F103RB board with the X-NUCLEO-IKS02A1 shield

Arduino library for Deneyap Temperature&Humidity, Barometer Sensor SHT4X

Open-source, modular ESP32-H2 Zigbee room sensor for mmWave presence, climate, light, pressure and sound—camera-free, cloud-free, and built for Zigbee2MQTT and Home Assistant.

An Arduino Uno Wifi based Bluetooth scanner for Sensirion SHT4x Smart Gadgets measuring temperature and humidity

Air quality monitoring on Raspberry Pi Pico, sent to Victoria Metrics, shown on Grafana: CO2, Humidity, Temperature, Volatile Organic Compounds, ..., you name it!

A XIAO ESP32-S3 MicroPython example showcasing I2C sensor interfacing, WiFi connectivity, NTP and RTC time synchronization with time-zone support, and task scheduling.

It's a simple demonstation of ESP32 + KSZ8863 + Modbus TCP Slave (TCP Server) + SHT40. it reads and updates the temperature and humidity from Sensirion's SHT40 via I2C every one(1) sec. The reason I adopted the Sensirion's SHT40 why it's pretty accurate and relatively affordable. if you need more accuracy and precise tolerance, consider SHT45..,,,