wifi-repeater

Easily create a WiFi Access Point or WiFi repeater with balenaOS

A WiFi repeater built around Raspberry Pi under 10 US$

Rpi3B config to use as WiFi AP and Client simultaneously

A simple source to turn your esp8266 into a repeater and extend your wifi range

ESP8266 Wifi repeater, ESP32 WiFi repeater, Esp32 Range Extender, ESP8266 Range extender

ESP32 true NAT Wi-Fi repeater + IoT edge node (sensors, relays, MQTT, Home Assistant) configured from a captive-portal web page.

Advanced ESP32-S3 WiFi Repeater with WPA2-Enterprise support, embedded Tailscale Subnet Router, and DuckyScript HID injector.

Complete guide to install OpenWrt on WiFi Repeater U14 (QCA9533). Includes U-Boot flashing, Breed recovery, and detailed hardware specs.

ESP32-S3 WiFi repeater with WPA2-Enterprise support and an embedded Tailscale client (Subnet Router / SNAT) with Web UI.

Turn any ESP8266 into a smart Wi-Fi extender/repeater with a mobile-friendly web dashboard: NAT internet sharing, MAC firewall, live signal/status monitoring, Wi-Fi scanner, auto-reconnect, and LED status indicators. Available in STAR (full-featured) and LIGHT editions, precompiled as ready-to-flash .bin files for 1MB and 4MB ESP8266 boards.

Open-source ESP32 firmware that turns your board into a smart portable Wi-Fi router with NAT, DHCP, DNS, transparent proxy, bandwidth management, per-device policies, and a modern web dashboard.

🏠 ESP32 Smart Home Network Hub - WiFi NAT Router, IoT Network Isolation & IPTV Server. Complete solution for home network management with 15+ Mbps NAT throughput.

Colección de proyectos prácticos con ESP32 y variantes — WiFi repeater, IoT, sensores y más

Step-by-step guide to turn an ESP32-C6 into a WiFi NAT router/repeater by flashing the community esp32_nat_router_extended firmware.

Proximity Wi-Fi Repeater based on ESP32 SoCs

Arduino NodeMCU ESP8266 Module Wifi Extender / Wifi Çoklayıcı / Güçlendirici Türkçe Döküman

ESP-IDF WiFi repeater with transparent L2 bridging and MAC-NAT for multiple clients. Supports ESP32-C6 (WiFi 6), S3, C3 and classic ESP32. Web GUI for live configuration, SSID cloning, pseudo-mesh roaming, DHCP-ACK sniffing for zero-config subnet detection.

Battery-powered Wi-Fi Repeater based on the ESP8266 board, than can be used to extend a Wi-Fi Network range in areas where it could be difficult to use standard Wi-Fi repeaters

Zeronetfix Permanent Wifi Repeater

A non-blocking, high-performance ESP8266 Wi-Fi Range Extender & NAT Repeater featuring asynchronous DNS proxying, channel auto-alignment, and a cyberpunk setup UI.